The iso-kinetic S-Series provides reliable water content metering in all small pipe applications. The ZT-100 S-Series of Watercut Meters can be installed inline or in bypass. Built to any piping spec in the materials of your choice. For larger pipes also check out the F-Series and the new I-Series of water cut meters.
The ZelenTech ZT-100 Watercut Monitor determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The emulsion stream is continuously monitored for capacitance and converted into percentage of water by the Watercut Monitor logic.
ZelenTech ZT-100 Watercut Monitors (also known as BS&W, OWD, WFM or Water in Oil Analyzers) offers you unmatched flexibility as we offer virtually unlimited number of configurations.
Features
| Parameter | Value |
|---|---|
| Response time | 1 sec |
| Sensitivity | 0.01% |
| Repeatability | 0.1% |
| Output | 4-20mA + HART |
| Power Supply | 24VDC (Loop Powered) |
| Power Consumption | 0.66W Max |
| Temperature (Media) | +150° C (250 with High Temp Option) |
| Temperature (Ambient) | +60° C |
| Ingress Protection | IP66 |
| Measurement Range | 0-25% or 0-100% |
| Nominal Sizes | 1 to 6 inch or DN25 to DN200 |
| Material (Standard) | 316L |
| Seals and electrical insulators | PEEK |
| Parameter | Value |
|---|---|
| Principle of Operation | High Frequency Digital Capacitance |
| Resolution (Low Range) | 0.001% |
| Accuracy (Low Range) | 0.01% |
| Resolution (High Range) | 0.05% |
| Accuracy (High Range) | 0.05% |
| Repeatability | 0.01% Absolute |
| Max Water (Low Range) | 25% |
| Max Water (High Range) | 100% |
| Temp Compensation Range | >0°C – 180°C |
| Parameter | Value |
|---|---|
| Wetted Steel Material | 316L Standard (More exotic materials available) |
| Seals | PEEK |
| Max. Working Pressure | Up to Class 1500# |
| Max. Fluid Temperature | 180°C Standard (240°C Optional) |
| Max. Ambient Temperature | 65°C |
| Process Connection | ANSI, DIN, JIS |
The ZelenTech ZT-100 S-Series can optionally be fitted with an integrated Static Mixer (SM-Series). The mixer will ensure that a well mixed and homogenized stream will reach the sensor. We configure mixer elements and spacing in accordance with standards such as ISO 3171 and API MPMS8.2 to ensure that the sensor will see a truly representative view of what is going on in your pipes.
