The ZelenTech T-Series is a new range of insert Watercut Monitors (also known as BS&W, OWD, WFM or Water in Oil Analyzers) developed in-house. The T-Series is primarily designed for insertion into smaller pipes and specifically targeted at Well-Head applications where this type of meters are in common use. The ZT100 T Series will fit in any 3/4 inch NPT socket previously used for other brands using similar designs.
Features
The T-Series is inserted through a 3/4 inch NPT nipple and complements the I-Series insertion meters that is geared towards large pipes.
The ZelenTech ZT-100 Watercut Monitor determines the percent watercut in an oil emulsion without requiring the physical separation of the fluids. The emulsion stream is continuously monitored for capacitance and converted into percentage of water by the Watercut Monitor logic.
| Parameter | Value |
|---|---|
| Principle of Operation | High Frequency Digital Capacitance |
| Resolution | 0.05% |
| Accuracy | 0.05% |
| Repeatability | 0.01% Absolute |
| Max Water | 100% |
| Temp Compensation Range | 0°C – 180°C |
| Parameter | Value |
|---|---|
| Response time | 1 sec |
| Sensitivity | 0.01% |
| Repeatability | 0.1% |
| Output | 4-20mA + HART |
| Power Supply | 24VDC (Loop Powered) |
| Power Consumption | 0.66W Max |
| Temperature (Media) | +150° C (250 with High Temp Option) |
| Temperature (Ambient) | +60° C |
| Ingress Protection | IP66 / Nema 4X & 7 |
| Measurement Range | 0-100% |
| Pressure Rating | Up to Class 600# |
| Probe entry nozzle sizes | 3/4 inch NPT |
| Line Sizes Nominal Sizes | 2 or 3 inch or larger using adapter |
| Material (Standard) | 316L (Optional Duplex, Monel or other steels) |
| Seals and electrical insulators | PEEK |
| Parameter | Value |
|---|---|
| Wetted Steel Material | 316L Standard (More exotic materials available) |
| Seals | PEEK |
| Max. Working Pressure | Up to Class 600# |
| Max. Fluid Temperature | 180°C Standard (240°C Optional) |
| Max. Ambient Temperature | 65°C |
| Process Connection | 3/4 inch NPT or 2 inch flanged adapter |
