A High Integrity Pressure Protection System is an instrumented protective layer designed to prevent downstream pressure from exceeding a defined safe limit. Rather than relieving excess pressure to atmosphere or flare after it occurs, HIPPS detects an abnormal pressure condition and rapidly isolates the source before the protected equipment is overstressed. A typical system combines pressure transmitters or switches, a safety logic solver, final isolation valves and the associated instrumentation needed to achieve the required safety integrity. HIPPS is used where conventional relief arrangements may be impractical, where flare or relief loads need to be limited, or where high upstream pressure could exceed the design pressure of downstream equipment. Emphor IPS supports HIPPS projects by coordinating the sensing, logic, shutdown valve and package interfaces around the required protection philosophy and project safety requirements.
As a leading provider of HIPPS in the UAE, we support HIPPS package engineering coordination, instrumentation, valve integration, logic interfaces, testing, installation supervision and commissioning. Final architecture and safety integrity requirements should follow the project's hazard analysis, SIL assessment and functional safety lifecycle.
This part of the package brings together Redundant pressure sensing, Safety logic solver so the skid performs its primary process or measurement duty under the specified operating conditions. The configuration is selected around the fluid, capacity, operating range and required performance.
Functions such as Fast-acting final isolation valves, Partial-stroke or diagnostic functions where specified are coordinated with the main process duty so control, protection and operability are considered as part of the skid design rather than added after fabrication.
Emphor IPS can support HIPPS package engineering coordination, instrumentation, valve integration, logic interfaces, testing, installation supervision and commissioning. Final architecture and safety integrity requirements should follow the project's hazard analysis, SIL assessment and functional safety lifecycle.
Uses multiple independent pressure transmitters to detect a hazardous rise in upstream or protected-system pressure. Voting architecture and transmitter arrangement are defined by the approved safety requirement so a single instrument fault does not defeat protection.
Evaluates pressure inputs using certified safety logic and initiates shutdown when the defined trip condition is reached. Configuration follows the approved cause-and-effect, voting philosophy, proof-test requirements, diagnostics and target Safety Integrity Level for the function.
Provides rapid isolation of the pressure source through shutdown valves selected for closing time, pressure class, leakage requirement and process conditions. Valve actuators and accessories must support the response and reliability assumed in the safety analysis.
Uses partial-stroke testing or other diagnostics where specified to identify developing final-element problems between full proof tests. Diagnostic coverage, test interval, fault response and allowable process disturbance are defined within the approved functional-safety and maintenance strategy.
Provides controlled means for testing or maintaining HIPPS components without creating unmanaged protection gaps. Any bypass arrangement requires clear indication, procedures, authorisation and operating restrictions consistent with the safety requirement specification and site functional-safety practices.
Coordinates HIPPS status, trips, alarms and permissives with the wider emergency shutdown and plant control architecture without compromising system independence. Interface design defines signal direction, segregation, diagnostics and operator visibility according to the approved safety philosophy.
Oil & Gas
Petrochemical
Refining
Gas Processing
Pipeline Facilities